SB9119S CONTAINER ROLL OUT PLATFORM (CROP)

SB9119S CONTAINER ROLL OUT PLATFORM (CROP)

- PRIMARY DESIGN FEATURES -

The CROP is capable of being loaded and handled at cargo consolidation points and warehouses with common commercial style Materials Handling Equipment (MHE) as well as being handled with the airport ground handling roller systems. One set of fork pockets is provided on the side and a second set is provided on the front of the CROP.
The CROP has side rail tie down apertures designed for positive securement of a variety of freight of all kinds. This SEA BOX design offers a total of 19 sets of tie down points.
The CROP has a built in rail and securement system using internal corner post locks for alignment and restraint of a loaded CROP within an ISO container. Screw out type locks engage with recesses of the corner posts to restrain the platform inside the container.
It is possible to stack and secure eight (8) empty CROPs within an ISO container or trailer for retrograde shipment. The CROP can be stacked upon each by MHE or the PLS truck. The stacked module can be moved and carried by the PLS truck or trailer
Since loads would be inside a closed ISO 20' container, it provides required security for Category I, II, and III munitions as well as environmental protection for all cargo.

Spec Sheet in PDF Format:

Sea Box, Inc. Part Number:

SB9119S

CROP	Ext. Length	Ext. Height*	Ext. Width	Deck Length	Deck Height	Deck Width
Feet/Inches	19' 3"	5' 2 7/8"	7' 7 1/2"	18' 1"	10' 1/8"	7' 5"
Metric	5,867	1,626	2,416	5,618	267	2,261

* measured from top of A-frame

CROP	Tare Weight	Payload	Gross Weight
Lbs.	3,680	32,570	36,250
Metric	1,669	14,774	16,443

ALL NEW CONTAINERS ARE MANUFACTURED TO THE LATEST ISO STANDARDS

< PREVIOUS | SB5 CATALOG | NEXT >

Sea Box, Inc. Corporate Office:
802 Industrial Highway, East Riverton, NJ 08077-1910
Phone (856) 303-1101, Fax (856) 303-1501
E-mail: sales@seabox.com
Copyright ©1999 - Sea Box, Inc. All rights reserved